Troubleshooting RS800

GT recommends to watch the following video to help you troubleshooting your transmission :

 

Symptom Causes Solution
Loss of traction Ground drive belt tension Brake pedal cleaning
Pedal linkage disconnected Verify rod between pedal and transaxle
Broken CVT pulleys Replace pulley (p.10-11)
Broken shift cam Replace shift cam (p.15)
Internal issue Replace transaxle
Loss of speed range Broken CVT pulleys Replace pulley (p.10-11)
Loose nut on variation rod Retighten nut (p.10)
Loss of reverse function Failure of the Inversion control Verify Inversion Control (p.19)
Hard shifting Debris under Primary Pulley Clean Primary pulley area
Broken Primary pulley Replace pulley (p.10-11)
Inversion lever out of position Verify inversion lever position
Inversion security system failure Clean/Replace Inversion security system
Loss of freewheel function Broken Brake lever Replace brake kit (p.14)
Broken Bypass lever Replace Bypass lever (p.18)
Pedal not returning to neutral position Clean and free the pedal
Tractor not stopping in neutral position Debris under Primary pulley Clean Primary pulley area
Pedal not returning to neutral position Clean and free the pedal
Broken Primary pulley Replace pulley (p.10-11)
Trouble to return to neutral position Debris under Primary pulley Clean Primary pulley area
Loss of rolling resistance in neutral position Incorrect brake pedal rod adjustment Adjust pedal rod
Control cam not returning to neutral position Clean the Control cam
Broken brake spring Replace brake kit (p.14)
Broken brake lever Replace brake kit (p.14)