Troubleshooting RS800
GT recommends to watch the following video to help you troubleshooting your transmission :
| Symptom | Causes | Solution |
|---|---|---|
| Loss of traction | Ground drive belt tension | Brake pedal cleaning |
| Pedal linkage disconnected | Verify rod between pedal and transaxle | |
| Broken CVT pulleys | Replace pulley (p.10-11) | |
| Broken shift cam | Replace shift cam (p.15) | |
| Internal issue | Replace transaxle | |
| Loss of speed range | Broken CVT pulleys | Replace pulley (p.10-11) |
| Loose nut on variation rod | Retighten nut (p.10) | |
| Loss of reverse function | Failure of the Inversion control | Verify Inversion Control (p.19) |
| Hard shifting | Debris under Primary Pulley | Clean Primary pulley area |
| Broken Primary pulley | Replace pulley (p.10-11) | |
| Inversion lever out of position | Verify inversion lever position | |
| Inversion security system failure | Clean/Replace Inversion security system | |
| Loss of freewheel function | Broken Brake lever | Replace brake kit (p.14) |
| Broken Bypass lever | Replace Bypass lever (p.18) | |
| Pedal not returning to neutral position | Clean and free the pedal | |
| Tractor not stopping in neutral position | Debris under Primary pulley | Clean Primary pulley area |
| Pedal not returning to neutral position | Clean and free the pedal | |
| Broken Primary pulley | Replace pulley (p.10-11) | |
| Trouble to return to neutral position | Debris under Primary pulley | Clean Primary pulley area |
| Loss of rolling resistance in neutral position | Incorrect brake pedal rod adjustment | Adjust pedal rod |
| Control cam not returning to neutral position | Clean the Control cam | |
| Broken brake spring | Replace brake kit (p.14) | |
| Broken brake lever | Replace brake kit (p.14) |